UK Model A 1930 Sedan

We can build Hot Rods in the UK Too. The ukwheelsevents site is featuring a Model A Sedan Hot Rod Build at Build Pics UK

Take a look 

Views: 66

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by Brent Walter on June 15, 2013 at 10:18am

Sorry it took so long reply. I just happened on your post.  I was stationed in Europe (Germany) for many years and I used to go to the UK via the Chunnel quite a bit.  I have seen a lot of British Hot Rods.  Post the pics when you get the body done and mounted.  Would love to see it.

Permalink Reply by Brent Walter on June 15, 2013 at 10:20am

Just found the link to the finished product.  Looks good.

Permalink Reply by Russ Larcombe on June 16, 2013 at 9:26am

The Rod is now on the Road. Brent - Thanks for your interest . I have attached some more pictures

Attachments:
Permalink Reply by Brent Walter on June 17, 2013 at 2:47am

Engine looks like a Chevy Small block, a 350?.  If you go to any shows over there please send some pics.

 

Permalink Reply by Russ Larcombe on June 17, 2013 at 9:31am

Take at look at this UK show on the sister site to southeastwheelsevents.

http://ukwheelsevents.ning.com/photo/albums/nsra-billing-2013 

You can save any of the pictures you like

Russ

RSS

Birthdays

Birthdays Today

Birthdays Tomorrow

Blog Posts

A Bite of History: 1967 Mercedes-Benz 250SL

A Bite of History: by Mike Thies

1967 Mercedes-Benz 250SL

Introduced in late 1966 for a short, single-year production run, the 1967 Mercedes-Benz 250SL holds a special place in the “Pagoda” lineage (W113 series) as the rarest variant, with only about 5,196 units built. Positioned between the earlier 230SL and the later 280SL, the 250SL…

Continue

Posted by Michael Thies on August 14, 2025 at 7:30pm

A Bite of History: American Bantam “Woody” Station Wagon by Mike Thies

A Bite of History:  by Mike Thies

American Bantam “Woody” Station Wagon

The American Bantam Car Company was a small but innovative automaker based in Butler, Pennsylvania. Originally established as American Austin in the 1920s to produce miniature cars under license from the British Austin Motor Company, the firm reorganized…

Continue

Posted by Michael Thies on August 2, 2025 at 8:00pm — 1 Comment

A Bite of History: 1958 Porsche 356 Speedster

A Bite of History: by Mike Thies

1958 Porsche 356 Speedster

The 1958 Porsche 356 Speedster marks the swan song of one of Porsche’s most iconic and minimalist models. Originally introduced in 1954 at the urging of U.S. importer Max Hoffman, the Speedster was designed to be a low cost, lightweight, stripped-down entry sports car that could double as a weekend racer, especially for the California sports car scene. With its low windshield,…

Continue

Posted by Michael Thies on July 14, 2025 at 5:22pm

A Bite of History: 1948 Rover P3 Saloon

A Bite of History: by Mike Thies

1948 Rover P3 Saloon

The 1948 Rover P3 Saloon marked a pivotal moment in the evolution of British motoring. Introduced in the immediate aftermath of World War II, the P3 was a bridge between prewar craftsmanship and the modern engineering ethos that would come to define Rover’s future. Although its styling retained many traditional elements, including an upright grille, separate fenders, and rear-hinged front…

Continue

Posted by Michael Thies on July 14, 2025 at 8:39am

© 2025   Created by Global Wheels Events.   Powered by

Badges  |  Report an Issue  |  Terms of Service