Replies to This Discussion

Permalink Reply by Jessie (little lead foot) on December 11, 2010 at 3:46am

check with wind dancer graphics if he can't do it I bet they will know where you can get one, but give them call at 678-859-1874 and tell them little lead foot told you to call

• ▶ Reply

Permalink Reply by Bob Sarda on December 11, 2010 at 1:25pm

Jessie (little lead foot) said:

check with wind dancer graphics if he can't do it I bet they will know where you can get one, but give them call at 678-859-1874 and tell them little lead foot told you to call

THanks for the tip. I have contacted Tony Hooton. He is a graphix designer listed under the Car/Bike Casting Group. on this site.

 I'm sure you have heard this before,You are amazing with what you and your lead foot do.

Be careful  and good luck with your racing.

BS

• ▶ Reply

Permalink Reply by Greg Foster on December 14, 2010 at 11:46am

Hey Bob !

 

IF you haven't gotten it taken care of already, you might try The Inhouse in marietta

 

Ask to speak with Ryan Bennett. They do incredible work !

 

http://www.theinhouse.com/

2514 E. Piedmont Rd., Suite 200
Marietta, GA 30062

ph 770.321.0557

info@theinhouse.com

 

• ▶ Reply

Permalink Reply by Bob Sarda on December 14, 2010 at 11:51am

THanks Greg,

I have the logo Printed already.Tony Hooton Number 42 in the Casting Car and Bike group has completed the project. i will get my decal tomorrow.

It is30"x30" I will add the decal to my page if I can.

BS

Greg Foster said:

Hey Bob !

 

IF you haven't gotten it taken care of already, you might try The Inhouse in marietta

 

Ask to speak with Ryan Bennett. They do incredible work !

 

http://www.theinhouse.com/

2514 E. Piedmont Rd., Suite 200
Marietta, GA 30062

ph 770.321.0557

info@theinhouse.com

 

• ▶ Reply

Permalink Reply by Greg Foster on December 14, 2010 at 12:31pm

Awesome !   We will look forward to seeing pictures of the final product !

 

Cheers,

Greg Foster

 

 

Bob Sarda said:

THanks Greg,

I have the logo Printed already.Tony Hooton Number 42 in the Casting Car and Bike group has completed the project. i will get my decal tomorrow.

It is30"x30" I will add the decal to my page if I can.

BS

Greg Foster said:

Hey Bob !

 

IF you haven't gotten it taken care of already, you might try The Inhouse in marietta

 

Ask to speak with Ryan Bennett. They do incredible work !

 

http://www.theinhouse.com/

2514 E. Piedmont Rd., Suite 200
Marietta, GA 30062

ph 770.321.0557

info@theinhouse.com

 

• ▶ Reply

Permalink Reply by scott mcclain on January 5, 2011 at 2:40pm

look on ebay i saw some on there look up new to vintage stick to decal..:)

• ▶ Reply